Agilent Technologies 81134A Manuel de service télécharger pdf (Page 35)

DISPlay Commands SCPI Commands Reference

Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007 35

DISPlay Commands

The following table shows the Agilent 81133A/81134A Pulse

Generator DISPlay commands.

:DISPlay[:WINDow][:STATe]

Syntax

:DISP[:WIND][:STAT][?]

Form Set & Query

Description This command is used to turn the front panel display on and off.

Switching off the display improves the programming speed of the

instrument.

NOTE The display is switched back on if a key on the instrument is

pressed. The command

*RST

switches the display back on. Use

:SYSTem:PRESet

to perform a

*RST

without switching the display

back on.

Parameter ON|OFF|1|0

*RST value ON

Example Switch off the front panel display.

:DISP OFF

Command Parameter Description

:DISPlay

[:WINDow]

[:STATe][?] ON | OFF | 1 |

Sets/reads front panel display

state

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 103 104

Pas de commentaire

Agilent Technologies 81134A Manuel de service Page 35