Agilent Technologies 81134A Manuel de service télécharger pdf (Page 83)

SYSTem Commands SCPI Commands Reference

Agilent 81133A/81134A Pulse Generator Programming Guide, March 2007 83

:SYSTem:COMMunicate:LAN[:SELF]:DHCP

Syntax

:SYST:COMM:LAN[:SELF]:DHCP

Form Set

Description Enables/disables the DHCP.

•DHCP enabled

If DHCP is enabled, the instrument will request its own LAN

settings from the network. You only need to specify the LAN

name with

“:SYSTEM:COMMunicate:LAN[:SELF]:NAME” on

page 83.

•DHCP disabled

If DHCP is disabled, you have to set the instrument IP address,

subnet mask, gateway and host address with:

– “:SYSTem:COMMunicate:LAN[:SELF] :ADDRess” on page 84

– “:SYSTem:COMMunicate:LAN[:SELF] :SMASk” on page 84

– “:SYSTem:COMMunicate:LAN[:SELF] :DGATeway” on page 85

Parameter 1|0|ON|OFF

*RST value –

Example

Disable DHCP:

:SYST:COMM:LAN[:SELF]:DHCP OFF

:SYSTEM:COMMunicate:LAN[:SELF]:NAME

Syntax

:SYST:COMM:LAN[:SELF]:NAME <LAN name>

Form Set

Description Sets the LAN name. This command is only necessary for DHCP.

Parameter alphanumeric

*RST value –

Example

:SYST:COMM:LAN:NAME PP81134A01

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 103 104

Pas de commentaire

Agilent Technologies 81134A Manuel de service Page 83