Agilent Technologies InfiniiVision 3000 DSO-X 3054A Manuel de service télécharger pdf (Page 450)

450 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide

23 :SAVE Commands

:SAVE:WMEMory:SOURce

(see page 860)

Command Syntax

:SAVE:WMEMory:SOURce <source>

<source> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}

<n> ::= 1 to (# analog channels) in NR1 format

<r> ::= {1 | 2}

The :SAVE:WMEMory:SOURce command selects the source to be saved as a

reference waveform file.

Query Syntax

:SAVE:WMEMory:SOURce?

The :SAVE:WMEMory:SOURce? query returns the source to be saved as a

reference waveform file.

Return Format

<source> ::= {CHAN<n> | FUNC | WMEM<r> | NONE}

See Also • "Introduction to :SAVE Commands" on page 434

• ":SAVE:WMEMory[:STARt]" on page 451

• ":RECall:WMEMory<r>[:STARt]" on page 431

Only ADD or SUBtract math operations can be saved as reference waveforms.

MATH is an alias for FUNCtion. The query will return FUNC if the source is FUNCtion or

Pas de commentaire

Agilent Technologies InfiniiVision 3000 DSO-X 3054A Manuel de service Page 450