Agilent Technologies InfiniiVision 3000 DSO-X 3054A Manuel de service télécharger pdf (Page 679)

:TRIGger Commands 28

Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 679

:TRIGger:PATTern:RANGe

(see page 860)

Command Syntax

:TRIGger:PATTern:RANGe <less_than_time>[<suffix>],

<greater_than_time>[<suffix>]

<greater_than_time> ::= 10 ns to 9.99 seconds in NR3 format

<less_than_time> ::= 15 ns to 10 seconds in NR3 format

<suffix> ::= {s | ms | us | ns | ps}

The :TRIGger:PATTern:RANGe command sets the duration for the defined

pattern when the :TRIGger:PATTern:QUALifier command is set to INRange

or OUTRange. You can enter the parameters in any order — the smaller

value becomes the <greater_than_time> and the larger value becomes the

<less_than_time>.

Query Syntax

:TRIGger:PATTern:RANGe?

The :TRIGger:PATTern:RANGe? query returns the duration time for the

defined pattern.

Return Format

<less_than_time>,<greater_than_time><NL>

See Also • "Introduction to :TRIGger Commands" on page 641

• ":TRIGger:PATTern" on page 672

• ":TRIGger:PATTern:QUALifier" on page 677

• ":TRIGger:MODE" on page 648

Pas de commentaire

Agilent Technologies InfiniiVision 3000 DSO-X 3054A Manuel de service Page 679