Agilent Technologies EasyEXPERT Guide de l'utilisateur télécharger pdf (Page 129)

Agilent EasyEXPERT User’s Guide Vol. 2, Edition 1 9-3

If You Have a Problem

When You Operate B1500

This section covers the following basic problems that you may encounter when you

install or operate the B1500, and the solutions.

• “Power On Trouble”

• “SCUU is not Detected”

• “ASU is not Detected”

• “N1265A/N1266A/N1268A is not Detected”

• “External GPIB Devices are not Detected”

• “To Simplify the Connections”

To set up the Windows, see Agilent B1500A or B1505A User’s Guide.

If you need to reinstall Agilent EasyEXPERT software, see “B1500 System

Recovery” on page 9-18

Power On Trouble

• Connect the power cable to the B1500 firmly.

• Connect the power cable to power outlet firmly.

• Open the measurement terminals, and set the Standby switch to the ON position.

NOTE Open the measurement terminals at the device side when turning the B1500 on. Also

disconnect the device from the measurement terminals and open the measurement

terminals after the measurement. If you leave the connection with the device, the

device may be damaged by unexpected operations or charge-up of measurement

cables.

SCUU is not Detected

If Agilent B1500A/EasyEXPERT cannot detect SCUU (SMU CMU unify unit), turn

the B1500A off, check the cable connection, and reboot the B1500A/EasyEXPERT.

For the installation and connection of SCUU, see Agilent B1500A User’s Guide.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 227 228

Pas de commentaire

Agilent Technologies EasyEXPERT Guide de l'utilisateur Page 129