Agilent EasyEXPERT User’s Guide Vol. 2, Edition 1 9-19
If You Have a Problem
B1500 System Recovery
6. On the boot system selection menu, select Agilent Recovery System, and press
Enter key. To select the system, use arrow keys.
The Command Prompt window is opened. See Figure 9-1.
Where, 2 is not valid now. 3 should be entered for rebooting the B1500 without
performing system recovery.
7. For the message “Enter a Choice:”, enter 1 and press the Enter key. Message will
be displayed for asking if you allow to overwrite the C drive.
8. For the message, enter 1 and press the Enter key. System recovery starts.
After the recovery completes successfully, the Command Prompt window
displays the message as shown in
Figure 9-2.
Enter 1 for rebooting the B1500.
Enter 2 for turning off the B1500.
Figure 9-1 Agilent System Recovery Screen 1
Agilent Technologies System Utilities
Recovery Options
Choose one of the following:
-----------------------------------------------------------
1. Recover Factory Backup Image.
2. Update System.
3. Exit
-----------------------------------------------------------
Enter a Choice:
Figure 9-2 Agilent System Recovery Screen 2
Choose one of the following:
-----------------------------------------------------------
1. Restart
2. Shut down
-----------------------------------------------------------
Enter a Choice:
Commentaires sur ces manuels